IDS Forum

RE: IDS10 - AIX5 64bit onmonitor does not work

Posted By: Edcel Barcena
Date: Thursday, 14 September 2006, at 6:41 a.m.

In Response To: RE: IDS10 - AIX5 64bit onmonitor does not work (Lapeire, Jacques)

Hi,

FYI. The patch (IDS 9.40.FC7XC HPUX) for the said bug had just been delivered to us. Contact Informix tech support for details on how you can get it.

APAR IC50340 - USING ONMONITOR TO UPDATE ONCONFIG PARAMETERS DELETES VPCLASS ENTRIES

Regards,
Edcel

----------------------------------------
> To: ids@iiug.org
> From: jacques.lapeire@siemens.com
> Subject: RE: IDS10 - AIX5 64bit onmonitor does not work [7421]
> Date: Tue, 5 Sep 2006 03:54:52 -0400
>
>
> Hi,
>
> With IDS 9.4 I already faced some difficulties using onmonitor.
> It seems to be an "old" tool, that does not support features of newer
> releases
> and it can modify your config without you realising it.
>
> I had a configuration where the parameter VPCLASS was used (using an
> editor on onconfig file)
> and after a modification with onmonitor, the parameter was disappeared.
>
> Second experience was in relation with networker backup.
> The tape-device is set to "dummy" which also is not supported by
> onmonitor.
>
> Regards,
> Jacques
>
> -----Original Message-----
> From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of
> Support Informix
> Sent: dinsdag 5 september 2006 9:38
> To: ids@iiug.org
> Subject: IDS10 - AIX5 64bit onmonitor does not work [7419]
>
> Hello,
>
> I just installed IDS Version 10.00.FC3R1 on AIX 5.3
> And we have problems with onmonitor.
> Allmost onmonitor crashes with a segmentation fault
> P.ex : onmonitor -> dbspaces -> info
> or onmonitor -> status -> user threads
> There is no core dump, no error in the os errpt.
> But onmonitor -> status -> profile works.
>
> Dbaccess works fine.
> Has someone same experiences ?
>
> Thanks
> Yves
>
> *****DISCLAIMER*****
> Dit bericht en alle bijhorende zijn uitsluitend bestemd voor de
> geadresseerde
> en vertrouwelijk.
> Indien dit bericht niet voor U bestemd is, gelieve dit dan te
> vernietigen en
> de verzender te verwittigen.
> Openbaring, vermenigvuldiging, verspreiding en verstrekking aan derden
> is niet
> toegestaan, tenzij anders vermeld.
> Aangezien internet de integriteit van dit bericht niet kan verzekeren,
> kan de
> Dienst Vreemdelingenzaken niet verantwoordelijk gesteld worden indien
> dit
> bericht gewijzigd is.
> Bezoek onze website: http://www.dofi.fgov.be
>
> ----------------------------------------
> *****DISCLAIMER*****
> Ce message et toutes les pieces jointes sont etablis a l'intention
> exclusive
> de ses destinataires et sont confidentiels.
> Si vous recevez ce message par erreur, merci de le detruire et d'en
> avertir
> l'expediteur.
> Toute utilisation de ce message non conforme a sa destination, toute
> diffusion
> ou toute publication, totale ou partielle, est interdite, sauf
> autorisation
> expresse.
> L'internet ne permettant pas d'assurer l'integrite de ce message,
> l'Office des
> Etrangers decline toute responsabilite au titre de ce message, dans
> l'hypothese ou il aurait ete modifie.
> Visiter notre site web: http://www.dofi.fgov.be
>
> ************************************************************************
> *******
> Forum Note: Use "Reply" to post a response in the discussion forum.
>
>
> *******************************************************************************
> Forum Note: Use "Reply" to post a response in the discussion forum.
>

Messages In This Thread

• IDS10 - AIX5 64bit onmonitor does not work
  Support Informix -- Tuesday, 5 September 2006, at 3:38 a.m.
  • RE: IDS10 - AIX5 64bit onmonitor does not work
    Lapeire, Jacques -- Tuesday, 5 September 2006, at 3:54 a.m.
    • RE: IDS10 - AIX5 64bit onmonitor does not work
      Edcel Barcena -- Thursday, 14 September 2006, at 6:41 a.m.

IDS Forum is maintained by Administrator with WebBBS 5.12.